Monday, 29 December 2014
Wednesday, 24 December 2014
new step by step L2TP VPN CONNECTION
Set up the L2TP VPN connection on Windows XP
- This step-by-step tutorial shows how to setup a L2TP connection on Windows XP and start using ibVPN servers.
Step 1. Open Start and select Control Panel.
Step 2. Select Switch to Category View if control panel is not set to Category View.
Step 3. Select Network and Internet Connections.
Step 4. Select Create a connection to the network at your workplace.
Step 5. Select Connect to a Virtual Private Network (VPN) and click Next.
Step 6. Fill in the field Company Name with FUKhan VPN and click Next.
Step 7. Fill in the field Host Name with the server name
US VPN Server: us.freel2tpvpn.com
65.60.11.21
UK VPN Server: uk.freel2tpvpn.com
77.92.87.171
65.60.11.21
UK VPN Server: uk.freel2tpvpn.com
77.92.87.171
(The Internet address will be different, depending on the package you own) and click Next.
Step 8. Check the Add a shortcut to this connection on the desktop option and click Finish.
Step 9. Open the new connection by double clicking on the ibVPN icon availableon the desktop.
Step 10. Select Properties and open the Security tab.
Step 11. Update! Please read. Please check Advanced instead of Require data encryption (disconnect if none). Now select Maxmimum strenght encryption encryption (disconnect if server declines). Click on IPSec Settings button.
Step 12. Check Use pre-shared key "freel2tp" click OK.
Step 13. In the Networking tab select as Type of VPN: L2TP IPSec VPN then click OK.
Step 14. Fill in your Username (vpn) and Password (freel2tp), this information is available in the Client Area under My Details.
Step 15. Click Connect
step by step L2TP CONNECTION
Windows XP L2TP Setup Tutorial Screencast
Manual Setup is as follows:
Step 1
Please open the network connection windows using Start -> Network connections or Control Panel -> Network connections
choose "Create a new connection"
Step 2
to continue click "Next"
Step 3
select "Connect to the Network at my workplace" and click "Next"
Step 4
select "Virtual Private Network connection" and click "Next"
Step 5
TYPE: fukhan vpn
Step 6
type
US VPN Server: us.freel2tpvpn.com
65.60.11.21
UK VPN Server: uk.freel2tpvpn.com
UK VPN Server: uk.freel2tpvpn.com
77.92.87.171
click "Next"
Step 7
click "Finish"
Step 8
username=vpn
password=freel2tp
click "Properties"
Step 9
choose Security and click "IPSec Settings"
Step 10
key=freel2tp
Step 11
choose Networking, type of VPN L2TP IPSec VPN and click O'k
Step 12
enter User Name "vpn" and Password "freel2tp" & click Connect
Tuesday, 23 December 2014
FREE L2TP CONNECTION
SUMMARY:
PROBLEM OR GOAL:
SOLUTION:
From the Start menu, select Settings, select Network and Dial-up Connections, and then click Make New Connection.
For Windows XP, goto Control Panel and select Network Connections. Then click Create a new connection.
From the Network Connection Wizard, click Next.
From Network Connection Type, click to select Connect to a private network through the Internet, and then click Next.
For Windows XP, choose Connect to the network at my workplace. Then select Virtual Private Network connection.
You may see the Public Network screen at this time. Click to select the dial-up connection that connects you to your ISP. If your physical connection is an Ethernet connection, select Do not dial initial connection. If the physical connection is through an ISP, select Automatically dial this initial connection. Click Next.
For Windows XP, you will be prompted first for a connection name first.
For this example, we used Do not dial the initial connection.
From Destination Address, in the Host name or IP address box, enter the IP address or hostname of your Juniper Firewall's Untrust interface, and then click Next.
For this we have used 65.60.11.21, or 77.92.87.171 IP address.
From Connection Availability, click to select For all users, and then click Next.
From the Completing the Network Connection Wizard, enter a connection name, and then click Finish.
For Windows XP, the connection name was entered before step 4.
Click Properties.
Click to select the Security tab, click to select Advanced (custom settings), and then click Settings.
From Advanced Security Settings, from the Data encryption drop-down menu, click to select Optional encryption (freel2tp).
From Logon security, click to select Allow these protocols. Click to select only Unencrypted password (PAP)and Challenge Handshake Authentication Protocol (CHAP). Click to clear any protocols that do not apply.
Click OK.
Click to select the Networking tab. From the Type of VPN server I am calling drop-down menu, click to selectLayer-2 Tunneling Protocol (L2TP).
For Windows XP, select L2TP IPSec VPN.
Click OK.
From Network and Dial-up Connections, double-click the Dial-up Connection.
Enter your User name and Password.
The User name and Password matches the username and password of the L2TP user configured on the Firewall.
User Name= vpn Password= freel2tp Click Connect.
To make an L2TP connection using Windows 2000/XP, perform the following steps:
From the Start menu, select Settings, select Network and Dial-up Connections, and then click Make New Connection. For Windows XP, goto Control Panel and select Network Connections. Then click Create a new connection. From the Network Connection Wizard, click Next. From Network Connection Type, click to select Connect to a private network through the Internet, and then click Next. For Windows XP, choose Connect to the network at my workplace. Then select Virtual Private Network connection. You may see the Public Network screen at this time. Click to select the dial-up connection that connects you to your ISP. If your physical connection is an Ethernet connection, select Do not dial initial connection. If the physical connection is through an ISP, select Automatically dial this initial connection. Click Next. For Windows XP, you will be prompted first for a connection name first. For this example, we used Do not dial the initial connection. From Destination Address, in the Host name or IP address box, enter the IP address or hostname of your Juniper Firewall's Untrust interface, and then click Next. For this we have used 65.60.11.21, or 77.92.87.171 IP address. From Connection Availability, click to select For all users, and then click Next. From the Completing the Network Connection Wizard, enter a connection name, and then click Finish. For Windows XP, the connection name was entered before step 4. Click Properties. Click to select the Security tab, click to select Advanced (custom settings), and then click Settings. From Advanced Security Settings, from the Data encryption drop-down menu, click to select Optional encryption (freel2tp). From Logon security, click to select Allow these protocols. Click to select only Unencrypted password (PAP)and Challenge Handshake Authentication Protocol (CHAP). Click to clear any protocols that do not apply. Click OK. Click to select the Networking tab. From the Type of VPN server I am calling drop-down menu, click to selectLayer-2 Tunneling Protocol (L2TP). For Windows XP, select L2TP IPSec VPN. Click OK. From Network and Dial-up Connections, double-click the Dial-up Connection. Enter your User name and Password. The User name and Password matches the username and password of the L2TP user configured on the Firewall. User Name= vpn Password= freel2tp Click Connect.
Subscribe to:
Comments (Atom)